Journal Publications

  • Zhang, D., D. Arola and M. C. L. Patterson, (2004) “The Mechanical Properties of Carbon-Carbon Optic Grids Determined Using a Bi-axial Optical Extensometer,” Journal of Materials Science (in press).

  • Arola, D., D. Zhang, R. Reprogel, W. Zheng, R. M. Dyer and U. Tasch, (2004) “On the Mechanical Behavior of Bovine Hoof Horn,” accepted for publication in the Transactions of the American Society of Agricultural Engineers.

  • Zhang, D and D. Arola, (2004) “Application of Digital Image Correlation to Biological Tissues,” Journal of Biomedical Optics. (in press).

  • Arola, D. and M. L. McCain, (2003) “Surface Texture and the Stress Concentration Factor for Fastener Holes in FRP Components,” Journal of Composite Materials Vol. 37 (16), pp. 1439-1460.

  • Arola, D. and J. A. Rouland, (2003) “The Effects of Tubule Orientation on Fatigue Crack Growth in Dentin,” Journal of Biomedical Materials Research Vol. 67A (1), pp. 78-86.

  • Arola, D., J. Rouland and D. Zhang, (2002) “Fatigue and Fracture of Bovine Dentin,” Experimental Mechanics Vol. 42 (4), pp. 380-388.

  • Zhang, D., C. D. Eggleton and D. Arola, (2002) “Evaluating the Mechanical Behavior of Arterial Tissue Using Digital Image Correlation,” Experimental Mechanics Vol. 42 (4), pp. 409-416.

  • Smith, R., T. Farquhar, D. Arola, S. Bhonsale and D. Sullivan, (2002) “A Structural Evaluation of an Aircraft Auxiliary Fuel Tank,” Experimental Techniques Vol. 26 (5), pp. 19-23.

  • Arola, D., M. L. McCain, S. Kunaporn and M. Ramulu, (2002) ”Waterjet and Abrasive Waterjet Surface Treatment of Titanium: A Comparison of Surface Texture and Residual Stress,” WEAR Vol. 249 (1), pp. 943-950.

  • Arola, D. and C. L. Williams, (2002) “Surface Texture, Fatigue, and the Reduction in Stiffness of Fiber Reinforced Plastics,” Transactions of the ASME Journal of Engineering Materials and Technology Vol. 124 (2), pp. 160-166.

  • Arola, D. and C. L. Williams, (2002) “Estimating the Fatigue Stress Concentration Factor of Machined Surfaces” International Journal of Fatigue Vol. 24 (9), pp. 923-930.

  • Zhang, D. and D. Arola, (2002), “Digital Image Processing of Moiré Fringe Patterns With An Application to Fracture in Bovine Dentin,” Optical Engineering Vol. 41 (5), pp.1115-1121.

  • Zhang, D., M. Ma and D. Arola, (2002) “Fringe Skeletonizing Using an Improved Derivative Sign Binary Method,” Optics and Lasers in Engineering Vol. 37 (1), pp. 51-62.

  • Arola, D., M. B. Sultan and M. Ramulu, (2002) "Finite Element Modeling of Edge Trimming Fiber Reinforced Plastics," Transactions of the ASME Journal of Manufacturing Science and Engineering Vol. 124 (1), pp. 32-41.

  • Zhang, D. and D. Arola, (2001) “Evaluating the Elastic Modulus of Bone Using Electronic Speckle Pattern Interferometry,” Experimental Techniques Vol. 25 (5), pp. 32-34.

  • Arola, D., D. T. Yang and K. A. Stoffel, (2001) “The Apparent Volume of Interdigitation: A New Parameter for Evaluating the Influence of Surface Topography on Mechanical Interlock,” Journal of Biomedical Materials Research: Applied Biomaterials Vol. 58 (5), pp. 519-524.

  • Arola, D., L. A. Galles and M. F. Sarubin, (2001) "A Comparison of the Mechanical Behavior of Posterior Teeth with Amalgam and Composite MOD Restorations," Journal of Dentistry Vol. 29 (1), pp. 63-73.

  • Arola, D. and M. L. McCain, (2000) "Abrasive Waterjet Peening: A New Method of Surface Preparation for Metal Orthopedic Implants," Journal of Biomedical Materials Research: Applied Biomaterials Vol. 53 (5), pp. 536-546.

  • Ramulu, M., S. Kunaporn, D. Arola, M. Hashish and J. Hopkins, (2000) "Waterjet Machining and Peening of Metals," ASME Journal of Pressure Vessel Technology Vol. 122 (1), pp. 90-95.

  • Arola, D. and M. P. Huang, (2000), “The Influence of Simultaneous Mechanical and Thermal Loads on the Stress Distribution in Molars with Amalgam Restorations,” Journal of Materials Science: Materials in Medicine, Vol. 11 (3), pp. 133-140.

  • Arola, D. and M. Ramulu, (1999), “An Examination of the Effects from Surface Texture on the Strength of Fiber Reinforced Plastics,” Journal of Composite Materials Vol. 33 (2), pp. 102-123.

  • Arola, D., P. G. Reinhall, M. G. Jenkins, and S. C. Iverson, (1999) “An Experimental Analysis of a Hybrid Bicycle Frame,” Experimental Techniques Vol. 23 (3), pp. 21-24.

  • Arola, D., M. P. Huang and M. B. Sultan, (1999), "The Failure of Amalgam Restorations Due to Cyclic Fatigue Crack Growth," Journal of Materials Science: Materials in Medicine Vol. 10 (6), pp. 319-327.

  • Arola, D. and M. Ramulu, (1998), “Net-Shape Machining and the Process Dependent Failure of Fiber Reinforced Plastics under Static Loads,” ASTM Journal of Composites Technology and Research Vol. 20 (4), pp. 210-220.

  • Arola, D. and M. Ramulu, (1997), "Orthogonal Cutting of Fiber Reinforced Composites: A Finite Element Analysis," International Journal of Mechanical Sciences Vol. 39, (5), pp. 597-613.

  • Arola, D. and M. Ramulu, (1997), "Net Shape Manufacturing and the Performance of Polymer Composites Under Dynamic Loads," Experimental Mechanics Vol. 37, (4), pp. 379-385.

  • Arola, D. and M. Ramulu, (1997), "Material Removal in Abrasive Waterjet Machining of Metals: A Residual Stress Analysis," WEAR Vol. 211 (2), 302-310.

  • Arola, D. and M. Ramulu, (1997), "Material Removal in Abrasive Waterjet Machining of Metals: Surface Integrity and Texture," WEAR Vol. 210, (6), pp. 50-58.

     Conference Proceedings

  • Dyer, M., D. Arola, D. Zhang, R. Reprogel, W. Zheng and U. Tasch, (2004) “On the Mechanical Behavior of Bovine Hoof Horn,” in Proceedings of the 13th International Symposium on Lameness in Ruminants, Maribor, Slovenija, Feb. 11-15, pp. 82-83.

  • Sundaram, N. and D. Arola, (2003) “On the Evaluation of Fatigue Crack Growth in Human Dentin,” in Proceedings of the Technical Conference on Mechanics of Biological and Biologically Inspired Materials and Systems, Springfield MA, October 2-3, 2003, Paper No. 28.

  • Yang, D. T., D. Zhang, and D. Arola, (2003) “Bone Surface Topography, Fatigue and Loosening of the Bone Cement Interface,” in Proceedings of the Technical Conference on Mechanics of Biological and Biologically Inspired Materials and Systems, Springfield MA, October 2-3, Paper No. 26.

  • Arola, D., D. Zhang, R. Reprogel, W. Zheng, *R. M. Dyer, U. Tasch and A. Lefcourt, (2003) “Moisture and the Mechanical Behavior of Bovine Hoof Horn,” in Proceedings of the Technical Conference on Mechanics of Biological and Biologically Inspired Materials and Systems, Springfield MA, October 2-3, Paper No. 27.

  • Zheng, W., N. Sundaram, J. Rouland and D. Arola, (2003) “Dental Implants, Stress Ratio and Fatigue Failures in Dentin Due to Cyclic Crack Growth,” Presented at the First International Conference on Medical Implants, Washington DC, July 25-28, and International Journal of Medical Implants and Devices, Vol. 1 (1) pp. 25.

  • Zou, Q., R Reprogel, D Arola, (2003) “Evolution of Microcrack Damage in Dentin Resulting from Fatigue Loading,” Presented at the First International Conference on Medical Implants, Washington DC, July 25-28, and International Journal of Medical Implants and Devices, Vol. 1 (1) pp. .

  • Stoffel, K.A., DT Yang, D Arola, (2003) “The Effects of Bone Surface Preparation on Shear Strength of the Cement/Bone Interface,” Presented at the First International Conference on Medical Implants, Washington DC, July 25-28, and International Journal of Medical Implants and Devices, Vol. 1 (1) pp. .

  • Yang, D.T., KA Stoffel, D Arola (2003) “Bone Surface Roughness Parameters Affect the Shear Strength of the Bone/Cement Interface,” Presented at the First International Conference on Medical Implants, Washington DC, July 25-28, and International Journal of Medical Implants and Devices, Vol. 1 (1) pp. .

  • Patterson, M.C.L., P. Wilbur, W. Zimbeck, F. Arnold, P. Charalambides, D. Arola and N. Meckel, (2002) “Low cost carbon-carbon optic grids for high power ion propulsion engines,” JANNAF Propulsion Meeting, Orlando Florida, November 19th, pp. 1-14.

  • Zhang, D., D. Arola and C. D. Eggleton, (2002) “Measurement of Poisson’s Ratio of Bovine Aorta Using Digital Image Correlation,” to appear in the proceedings of the 2nd BMES/IEEE joint meeting, Houston, Texas, October 23, 2002 (in press).

  • Narayana, S., J. Rouland, D. Zhang and D. Arola, (2002) “Monitoring Fatigue Cracks in Dentin Using Back-Illumination,” Biomedical Engineering: Recent Developments, J. Vossoughi (Editor), Proceedings of the 21st Southern Biomedical Engineering Conference, Washington DC, September 28-29, pp. 267-268.

  • Rouland, J. A. and D. Arola, (2002) “Cyclic Crack Growth in Bovine Dentin: The Influence of Tubule Orientation and Stress Ratio,” Biomedical Engineering: Recent Developments, J. Vossoughi (Editor), Proceedings of the 21st Southern Biomedical Engineering Conference, Washington DC, September 28-29, pp 269-270.

  • Arola D., D. Zhang, R. Reprogel, W. Zheng, P. Rajkondawar, U. Tasch, (2002) “The Influence of Moisture on the Elastic Properties of Bovine Hoof Horn” Biomedical Engineering: Recent Developments, J. Vossoughi (Editor), Proceedings of the 21st Southern Biomedical Engineering Conference, Washington DC, September 28-29, pp. 147-148.

  • Galles-Martin, L., D. Zhang and D. Arola, (2002) “Restored Molars: An Evaluation of Mechanical Behavior Using ESPI,” Proceedings of the SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, Milwaukee, Wisconsin, June 10-12, Paper No. 76.

  • Yang, D. T., K. A. Stoffel, D. Zhang and D. Arola, (2002) “Loosening in Total Hip Arthroplasty: An Evaluation Using DIC and ESPI,” Proceedings of the SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, Milwaukee, Wisconsin, June 10-12, Paper No. 75.

  • Zhang, D. and D. Arola, (2002) “A New Fast-Search Strategy for Digital Image Correlation,” Proceedings of the SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, Milwaukee, Wisconsin, June 10-12, Paper No. 80.

  • Zhang, D., C. Eggleton and D. Arola, (2002) “An Application of Digital Image Correlation to Bovine Aorta,” Proceedings of the SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, Milwaukee, Wisconsin, June 10-12, pp. 194.

  • Zhang, D., P. Rajkondawar, D. Arola, and U. Tasch (2002) “Mechanical Characterization of Bovine Hooves: Comparing Healthy and Ailing Hooves,” Proceedings of the SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, Milwaukee, Wisconsin, June 10-12, pp. 256.

  • Zhang, D., S. Davis, C. Eggleton and D. Arola, (2002) “Examining the Constitutive Behavior of Bovine Aorta Using Digital Image Correlation,” Proceedings of the Annual Meeting of the Society of Biomaterials, Tampa, Florida, April 24-27, pp. 315.

  • Rouland, J. A. and D. Arola (2002) “A Preliminary Study of Fatigue Crack Growth in Bovine Dentin,” Proceedings of the Annual Meeting of the Society of Biomaterials, Tampa, Florida, April 24-27, pp. 479.

  • Yang, D. T. D. Zhang, K. A. Stoffel and D. Arola, (2002) “The Mechanics of Loosening in Cemented Total Hip Replacements Resulting from Fatigue Loads,” Proceedings of the Annual Meeting of the Society of Biomaterials, Tampa, Florida, April 24-27, pp. 546.

  • Kim, P, D. Richman-Raphael, D. Arola, P. Yip, C. Hall, A. Polotsky, D. Hungerford and C. G. Frondoza, (2002) “Surface Modification of Titanium (cpTi) by Abrasive Waterjet Peening Promotes Proliferation and Phenotype Expression of Human Osteoblasts In Vitro” Proceedings of the Annual Meeting of the Society of Biomaterials, Tampa, Florida, April 24-27, pp. 632.

  • Jenkins, M. G and D. Arola, (2001) “When is a Truss not a Truss: A Do-Say Pedagogical Laboratory Exercise,” Proceedings of the 2001 American Society for Engineering Education Annual Conference & Exposition, Albuquerque, New Mexico, June 24 - 27.

  • Arola, D. and J. Rouland, (2001) “An Experimental Evaluation of Cyclic Crack Growth in Mature Bovine Dentin,” Proceedings of the SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, Portland, Oregon, June 4-6, pp. 780-782.

  • Arola, D., D. K. Tran, and D. Zhang (2001) “The Fracture Process Zone in Bovine Dentin,” Proceedings of the SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, Portland, Oregon, June 4-6, pp. 783-786.

  • Arola, D., D. K. Tran, Y. Yang, D. Zhang, (2001) “An Evaluation of the Elastic Modulus of Bovine Dentin Using a Hybrid Approach,” Proceedings of the Annual Meeting of the Society of Biomaterials, Saint Paul, Minnesota, April 24-29, pp. 50.

  • Arola, D. and L. A. Galles, (2001) “A Probabilistic Finite Element Analysis of the Stress Distribution in Molars with Composite Restorations,” Proceedings of the Annual Meeting of the Society of Biomaterials, Saint Paul, Minnesota, April 24-29, pp. 545.

  • Yang, D. T., K. A. Stoffel, and D. Arola, (2001) “Estimating the Apparent Volume of Cement Interdigitation from the Profiles of Bone and Implant Surfaces,” Proceedings of the Annual Meeting of the Society of Biomaterials, Saint Paul, Minnesota, April 24-29, pp. 437.

  • Arola, D., M. P. Huang, L. A. Galles, and M. B. Sultan (2000) “Cusp Fracture of Restored Molars Attributed to Cyclic Fatigue Crack Growth,” Proceedings of the 6th World Biomaterials Congress, Kamuela, Hawaii, May 15-20, pp. 85.

  • Arola, D., and M. L. McCain, (2000) “Abrasive Waterjet Peening: A New Method of Surface Preparation for Metal Implants,” Proceedings of the 6th World Biomaterials Congress, Kamuela, Hawaii, May 15-20, pp. 815.

  • Farquhar, T., R. L. Smith, and D. Arola, (2000) “The Effect of Moisture Content on Acoustic Wavespeed in Bovine Dentin: A Model for Age-Related Changes,” Proceedings of the 6th World Biomaterials Congress, Kamuela, Hawaii, May 15-20, pp. 86.

  • Ramulu, M., K. Sawalee, D. Arola, M. Hashish, and J. Hopkins, (1999) "Waterjet Machining and Peening of Metals," in proceedings of the ASME Pressure Vessel and Piping Conference, High Pressure Technology 1999, ASME Bound Volume PVP-VOL. 384, Boston, Massachusetts, August 1-5, pp. 23-31.

  • Arola, D. and M. L. McCain, (1999) "Accounting for Drilling Defects on the Performance of Fiber Reinforced Plastics," Proceedings of the SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, Cincinnati, Ohio, June 7-9, pp. 444-447.

  • Arola, D. and M. P. Huang, (1999) "Cavity Preparation and the Influence of Marginal Surface Flaws on Failure of Dental Restorations," Proceedings of the SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, Cincinnati, Ohio, June 7-9, pp. 503-506.

  • Arola, D., M. B. Sultan, and M. Ramulu, (1999) "A Finite Element Analysis of Chip Formation in the Machining of Fiber Reinforced Plastics," Transactions of the North American Manufacturing Research Institute, presented in Berkely, CA, May 25-28, Vol. 27, pp. 1-6.

  • Arola, D. and M. Ramulu, (1998) "Surface Texture and the Strength of Fiber Reinforced Plastics," in Proceedings of the Eighth Japan-US Conference on Composite Materials, Baltimore, Maryland, September 24-25, pp. 803-812.

  • Ramulu, M. and D. Arola, (1997), “Abrasive Waterjet Process Dependent Performance of Polymer Composites Under Dynamic Loading,” Proceedings of the 9th American Waterjet Conference, Dearborn, Michigan, August 23-26, pp. 29-46.

  • Arola, D. and M. Ramulu, (1997), “Failure Process in Polymer Composite Laminates Under Dynamic Loading,” Proceedings of the SEM Spring Conference on Experimental Mechanics, Bellevue, Washington, June 2-4, pp. 67-68.

 
UMBC Mechanical Engg. Directions Contact Info Home